rexroth博世力士乐伺服驱动器过热警告维修：
E251含义：Motor Overtemperature Warning
电机过热警告
Description:故障说明：
As soon as the temperwature warning threshold (145°C) is exceeded,
一旦超过温度警告阈值（145°C）
warnig E251 is generated and the drive complies with the command value.，就会生成警告E251，驱动器符合命令值。
This state can last infinitely without a powering down occurring. Not until the temperature error threshold is exceeded will an immediate powering down take place.这种状态可以无限持续，而不会发生断电。直到超过温度错误阈值，才会立即断电。
See also F219 Motor Overtemperature Shutdown
另请参阅F219电机过热停机
湖州力士乐驱动器修理：：
Cause:原因：
The motor became overloaded. The effective torque required of the motor
was above the allowable standstill continuous torque for too long.电机过载。电机所需的有效扭矩长时间高于允许的静止持续扭矩。
Remedy:补救措施：
Check the installation of the motor.
检查电机的安装。
For systems which have been in use for a long time, check to see if the drive conditions have changed (inregards to pollution, friction, components which have been moved, etc)对于已使用的系统长时间以来，检查驱动条件是否发生了变化（在污染、摩擦、移动的部件等）
转载请注明出处：上海仰光电子科技专业伺服驱动器维修,伺服电机维修
本文链接：/fuwu/Services_Show23462.htm
伺服驱动器维修 伺服电机维修 触摸屏维修 变频器维修
联系方式：
电话：021-50157782
手机：13817011982 微信同号
邮箱：shygdzi@163.com
联系人：张工
网址：
【 我们确保修好测试好给客户！！！！】
上一篇：Beckhoff倍福工控机CP2215-0000开机无显示故障检测维修（可上机测试）
下一篇：没有了
