普陀区包米勒伺服驱动器维修：
1100Drive manager general error pulse enable
驱动器管理器一般错误脉冲使可能。
When a pulse block has no reason that can be recognized by the drive manager (AM) (recognizable are: digital input, error with response pulse block, command control word), there is a threat of an endless change of statuses in the AM:
当脉冲块没有驱动管理器（AM）可以识别的原因（可识别的有：数字输入、响应脉冲块错误、命令控制字）时，AM中存在状态无休止变化的威胁：
Statuses 2->3->2 etc. are continuously processed because all switching conditions are met and the AM continues to attempt to activate the drive.
状态2->3->2等将被连续处理，因为所有开关条件都已满足，AM将继续尝试激活驱动器。
To prevent this, the change in status 3 will be disabled when a pulse block is recognized, a marker will be set and the error RC_ERR_DMGR_IF is entered for signaling.为了防止这种情况，当识别到脉冲块时，状态3的改变将被禁用，将设置标记，并输入错误RC_ERR_D MGR_IF用于信令。
No change is possible in Status 3 as long as the marker is set.
只要设置了标记，状态3就不可能更改。
Effect: The drive switches to Status 15 (Error). Other responses are no longer permitted so that the drive cannot automatically restart in the case above (pulse block without entering a error with pulse block) after Error #1100 has been reset.
影响：驱动器切换到状态15（错误）。其他响应不再被允许，使得在错误#1100被重置之后，在上述情况下驱动器不能自动重新启动（脉冲块而没有用脉冲块输入错误）。
转载请注明出处：上海仰光电子科技专业伺服驱动器维修,伺服电机维修
本文链接：/fuwu/Services_Show27043.htm
伺服驱动器维修 伺服电机维修 触摸屏维修 变频器维修
电话：021-50157782
手机：13817011982 微信同号
邮箱：shygdzi@163.com
联系人：张工
网址：
【 我们确保修好测试好给客户！！！！】
下一篇：没有了
